View EW Stats
Jump to content
Engineering Wall

Sign in to follow this  
Tiffany Yuan

Inspection rules for rubber parts for automobiles

Recommended Posts

5. bonding strength

Determination of adhesion strength of vulcanized rubber or thermoplastic rubber to fabric according to BT532-2008

Contents and requirements:

Instrument and equipment: electronic universal pull machine, measuring range ON~20000N, accuracy is 0.1N~10N

Environmental conditions: the laboratory temperature is 23℃±2, the relative humidity is 60%~70%

Test method: The width of the specimen is 25 mm (+ 0.5 mm) and the effective peeling length is at least 100 m. A crack about 50 mm is peeled at one end of the specimen.

The speed of the lower gripper is adjusted to 50 mm/min + 5 mm/min by adjusting the tension machine.

The stripping gripper is installed so that the clamping surfaces of the two grippers are on the same plane of the stripping force axis to ensure that the sample does not twist when the 180 * stripping occurs.

Adjust the zeros of dynamometer and recording system.

The machine is continuously removed from the machine, and the sample is stripped or damaged.

Results: the median of stripping force was determined according to A, B or C in GBT12833 standard. The adhesion strength of the specimen is calculated by dividing the median with the width of the specimen.

The number of samples is three, the arithmetic mean value is taken, and the test result is expressed in N/mm.


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this